PRODUCT RANGE:
Sizes: NPS 1/2 to NPS2 (DN15 to DN50)
Pressure Range: Class 800, Class 150 to Class 2500
MATERIALS:
Forged (A105, A182 F304, F304L, F316, F316L, F51, F53, A350 LF2, LF3, LF5,)
STANDARD
Design & manufacture API 602,ASME B16.34,BS 5352
Face-to-face MFG’S
End Connection - Flange Ends to ASME B16.5
- Socket Weld Ends to ASME B16.11
- Butt Weld Ends to ASME B16.25
- Screwed Ends to ANSI/ASME B1.20.1
Test & inspection API 598
Fire safe design /
Also available per NACE MR-0175, NACE MR-0103, ISO 15848
Other PMI, UT, RT, PT, MT
Design Features:
1.Forged Steel,Outside Screw and Yoke,Rising Stem,
2.Non-Rising Handwheel,Integral Backseat,
3.Reduced Bore or Full Port,
4.Socket Welded,Threaded,Butt Welded,Flanged End
5.SW, NPT, RF or BW
6.Welded Bonnet and Pressure Sealed Bonnet,Bolted Bonnet,
7.Solid Wedge,Renewable Seat Rings,Sprial Wound Gasket,
The Pressure Sealed Bonnet Globe Valve refers to a valve in which the closing member (valve) moves along the center line of the valve seat. Generally used for high-pressure valves (1500LB, 2500LB, etc.) According to this form of movement of the valve flap, the change of the valve seat port is proportional to the stroke of the valve flap. Because the valve rod opening or closing stroke is relatively short, and has a very reliable cut-off function.
1. The structure is simple, and it is more convenient to manufacture and maintain.
2. The working schedule is small, and the opening and closing time is short.
3. Good sealing performance, low friction between sealing surfaces and long service life.
Precautions
1. The cut-off valve operated by hand wheel and handle can be installed at any position of the pipeline.
2. Handwheels, handles and moving mechanisms are not allowed to be used for lifting.
3. The flow direction of the medium should be consistent with the arrow direction shown in the valve body.