Jenbacher J620 GS - 3431 kW (Natural Gas)

ReflowX SKU: REF-279

Description

Year: 2014
Location: Asia

Electrical Efficiency: ~42-44%
Heat Rate: Approx. 10,000 - 11,000 kJ/kWh (depending on load and conditions)
Exhaust Gas Temperature: ~450 - 550°C (at full load)
Exhaust Flow: 15,000 - 18,000 Nm³/h (depending on fuel quality and engine load)
Fuel Consumption: Approximately 0.31 - 0.33 m³/kWh (Natural Gas)
NOx Emissions: <250 mg/Nm³
CO2 Emissions: ~185-200 g/kWh (based on natural gas)

Piston Stroke: 190 mm
Cylinder Bore: 160 mm
Lubricant Capacity: 600 - 900 liters (depending on configuration)
Alternator: Brand New (replaced recently, offering improved performance and extended life)
Starting System: Electric start
Noise Level: ~85-90 dB(A)

Partly Dismantled: The engine is partially disassembled (likely for maintenance, transport, or upgrades). It's important to confirm if all parts are available for reassembly and if any additional parts are required.

Dimensions (approximate):
- Length: ~6,500 mm
- Width: ~2,300 mm
- Height: ~3,300 mm
- Weight: Around 35-40 tons (varies depending on specific setup)

Location: Asia
Shipping Considerations: If you're looking to purchase or relocate this engine, logistics and transportation should be carefully considered. Costs of dismantling and reassembly, as well as potential shipping and customs duties, need to be factored in.

New Alternator:

The brand new alternator is a significant advantage, ensuring reliable performance for future operations without the need for immediate alternator replacement.

Fuel Type (Natural Gas):

Natural gas is commonly used with this engine, but if you're considering future operations, you may also want to check whether it's compatible with other gases like biogas or landfill gas, which the engine can be adapted to.

Reassembly and Test Running:

Once the engine is reassembled, test running should be conducted to ensure it operates correctly and efficiently before being put into full operation.

Combined Heat and Power (CHP): The Jenbacher J620 GS is well-suited for combined heat and power applications where both electricity and heat are required, such as in industrial plants, district heating, or large commercial operations.
Industrial Power Generation: This engine is ideal for large-scale industrial power generation, including remote areas or locations with unreliable grid power.
Utility Power Generation: This engine is also used by utilities for efficient base-load or peak-load power generation.

Power Output: 3431 kW
Fuel: Natural Gas
Engine Hours: 71,000 hours
Condition: Partly dismantled, but alternator is brand new
Location: Asia
Suitable Applications: Power generation, combined heat and power, industrial plants

For further specifications or to inquire about this equipment and ReflowX's logistics services, Please contact ReflowX at info@reflowx.com

ReflowX and the seller retain the right to evaluate and approve offers.
Buyers should verify quantities and conditions upon delivery.
After successful engagement, both buyer and seller manage communication for payment terms and delivery schedule.
All parties agree to adhere to ReflowX Terms and Conditions in transactions.
Buyers can request value-added services such as pre-purchase inspections, Expediting & Delivery Services through ReflowX. Contact us!