CATERPILLAR XGC1900 Gas Power Module (2022)

ReflowX SKU: REF-4842

Product Details

Chat With Seller

Power Output:
- Prime Power: 1,900 kW (2,550 HP) at 1800 RPM
- Standby Power: 2,100 kW (2,820 HP) at 1800 RPM
Frequency: 60 Hz (standard)
Speed: 1800 RPM
Fuel Consumption (Natural Gas):
- Full Load: Approx. 1860-1900 m³/day (at 100% load)
- 75% Load: Approx. 1,400-1,450 m³/day
- 50% Load: Approx. 1,000-1,050 m³/day
Efficiency:
- Thermal Efficiency: 41-42% depending on load conditions

Emissions Standards: Meets EPA Tier 4 Final and EU Stage V emission standards.
NOx Emissions: Reduced to less than 0.5 g/kWh.
CO2 Emissions: Significantly reduced due to high efficiency.
Particulate Matter (PM): Meets the required standards for particulate emissions.

Cooling System: Water-cooled, closed-loop system.
Exhaust Emissions Control: Equipped with a three-way catalyst (TWC) to meet EPA Tier 4 and EU Stage V regulations.
Exhaust System: Includes integrated after-treatment for optimal performance.

Alternator Type: Caterpillar MARINE or Open Drip-Proof (ODP) alternators (depending on the configuration)
Voltage: Configurations typically include 400V, 480V, 600V, and others depending on installation requirements.
Frequency: 60 Hz standard for North America (50 Hz options available).
Power Factor: 0.8 lagging
Protection: Generator includes short-circuit, overload, and thermal protection.

Length: Approx. 5850 mm (230 inches)
Width: Approx. 2135 mm (84 inches)
Height: Approx. 2840 mm (112 inches)
Weight: Approximately 19,800 kg (43,600 lbs) – varies depending on the configuration.

Fuel Supply Pressure: 2.4-3.5 bar (35-50 psi) (natural gas)
Fuel System: Electronic fuel management system for precision.
Gas Pressure Regulator: Integrated, providing stable operation at varying pressures.
Gas Consumption:
- Full Load: Approx. 1900 m³/day
- 75% Load: Approx. 1,450 m³/day
- 50% Load: Approx. 1,000 m³/day

Oil Capacity: Approx. 190 L (50 US gallons)
Oil Pressure: 2.1-3.4 bar (30-50 psi) at rated speed
Oil Filtration: Full-flow filtration system with bypass.
Oil Change Interval: Typically every 500 hours or as per manufacturer's guidelines.

Control Panel: Equipped with Caterpillar EMCP 4.4 for monitoring and diagnostics, including:
- Engine hours
- Fuel consumption and efficiency
- Voltage, current, frequency, and power output
- Engine diagnostic codes and status
- Remote monitoring capability (via Caterpillar VisionLink)
Alarm System: Audible and visual alarms for oil pressure, coolant temperature, and other critical parameters.
Control Type: Fully electronic, providing automated load sharing, synchronization, and start/stop operations.
NO REDIATORS

For further specifications or to inquire about this equipment and ReflowX's logistics services, Please contact ReflowX at info@reflowx.com

ReflowX and the seller retain the right to evaluate and approve offers.
Buyers should verify quantities and conditions upon delivery.
After successful engagement, both buyer and seller manage communication for payment terms and delivery schedule.
All parties agree to adhere to ReflowX Terms and Conditions in transactions.
Buyers can request value-added services such as pre-purchase inspections, Expediting & Delivery Services through ReflowX. Contact us!