Browse + Post a Listing

MITSUBISHI S16 PTA2 - S - Engine / Generators

ReflowX SKU: REF-1085

whatsapp Whatsapp

Description

General Information:

  • Model: Mitsubishi S16PTA2-S
  • Year: 2003
  • Power Output (Each): 1880 kW per unit
  • Frequency: 50 Hz
  • Voltage: 220 V to 380 V (adjustable depending on configuration)
  • Engine Hours: 800 hours (low operating hours since new)
  • Fuel Type: Diesel Oil
  • Cooling System: Includes Radiator for cooling
  • Condition: Good-running condition, well-maintained and operational
  • Location: China
  • Delivery: Immediate Delivery upon agreement
  • Price: Upon Request (please contact the seller directly for pricing details)
  • Photos: Available upon request

Engine Specifications:

  • Engine Configuration: V16 (16 cylinders in a V-configuration)
  • Cylinder Bore: 170 mm
  • Stroke: 180 mm
  • Total Displacement: 78.7 L (4,805 cubic inches)
  • Compression Ratio: 16.5:1 (for high-efficiency combustion)
  • Aspiration: Turbocharged and aftercooled
  • Cooling System: Radiator-cooled (includes full radiator system for engine cooling)
  • Cycle: Four-stroke diesel engine
  • Governor: Electronic governor for precise speed control
  • Exhaust Temperature: Typically around 450-500°C at full load

Performance Characteristics:

  • Rated Power Output: 1880 kW (1.88 MW) at 1500 RPM (50 Hz)
  • Rated Speed: 1500 RPM (to generate 50 Hz electrical output)
  • Fuel Consumption: Approximately 210-220 g/kWh (at full load)
  • Maximum Torque: Typically around 1,700-2,000 Nm at 1,200 RPM (high torque output)
  • Power Factor: 0.8 (Suitable for industrial applications)

Electrical Specifications:

  • Voltage Range: 220 V to 380 V
  • Frequency: 50 Hz (suitable for international operations)
  • Connection: 3-phase, standard industrial connection
  • Output Power: 1880 kW at 0.8 power factor
  • Generator Compatibility: Compatible with synchronous generators for power generation

Fuel System:

  • Fuel Type: Diesel Oil
  • Fuel Consumption: Approximately 210-220 g/kWh under full load
  • Fuel Filters: Primary and secondary filters for ensuring clean fuel supply
  • Fuel Tank: Varies based on setup, typically designed for long operation between refueling

Dimensions & Weight:

  • Length: Approx. 4,500 mm (varies with configuration)
  • Width: Approx. 2,500 mm
  • Height: Approx. 2,200 mm
  • Weight: Approx. 23,000 kg (with generator set, may vary with configuration)

Cooling System:

  • Radiator: Full cooling system (closed-loop radiator) included to maintain optimum engine temperature
  • Coolant Capacity: Approx. 300-400 liters
  • Cooling Efficiency: Engine designed to handle high loads with minimal overheating
  • Water Pump: High-performance coolant circulation pump

Control Panel:

  • Included: Full Control Panel for engine management
    • Automatic Start/Stop: Control panel will allow for automated start and stop based on load demand
    • Diagnostics: Provides real-time monitoring of key engine parameters (temperature, fuel consumption, power output)
    • Safety Shutdowns: Automatic shutdown for overspeed, low oil pressure, and high temperatures
    • Protection: Multiple protection settings to prevent engine damage (overload, overheat, etc.)

Maintenance & Service:

  • Oil Change Interval: Typically 500-1000 hours, depending on operational environment and load
  • Major Overhaul: Typically around 10,000-15,000 hours for large engines like this
  • Service Requirements: Regular service checks for fuel system, cooling, and lubrication
  • Routine Inspections: Check for oil levels, coolant, fuel filters, and exhaust systems to ensure optimal performance

Exhaust System:

  • Exhaust Temperature: Typically 450-500°C under full load
  • Turbocharging: Includes turbocharger and aftercooler for enhanced performance and efficiency
  • Exhaust Treatment: Engine complies with Tier 2 or Tier 3 emissions standards (may require additional exhaust after-treatment in some regions)
  • Exhaust Flow: Designed to handle high exhaust flow rates efficiently.

Applications:

  • Power Generation: Ideal for base-load power plants, industrial power generation, or backup power for critical infrastructure.
  • Marine Applications: Can be used in marine vessels (after modifications) that require high power output for propulsion.
  • Standby Power: Suitable for backup power in industrial plants, commercial buildings, hospitals, or data centers.
  • Remote Locations: Can be used for off-grid power generation, especially in areas with unreliable power sources.

Environmental Compliance:

  • Emissions: Designed to meet Tier 2 or Tier 3 emissions standards (depending on local regulations).
  • Noise Levels: Low noise design for operational environments that require noise reduction.
  • NOx, CO, CO2 Emissions: These engines are equipped with systems to minimize emissions, though additional after-treatment may be needed in some locations.

Summary of Key Specifications:

  • Model: Mitsubishi S16PTA2-S
  • Power Output (Each): 1880 kW (1.88 MW)
  • Frequency: 50 Hz
  • Voltage Range: 220 V to 380 V
  • Fuel Type: Diesel Oil
  • Engine Hours: 800 hours (since new, very low usage)
  • Cooling System: Includes Radiator
  • Control Panel: Included with engine
  • Location: China
  • Condition: Good-running
  • Immediate Delivery: Available upon request

Price and Availability:

  • Price: Upon Request – Please contact the seller for specific pricing information.
  • Photos: Available upon request – You can get photos of the units upon reaching out to the seller.

Contact the Seller:

For detailed pricing, photos, and shipping arrangements, please contact the seller directly.

If you need help with contacting the seller or further details, let me know, and I’d be happy to assist!

 

For further specifications or to inquire about this equipment and ReflowX's logistics services, Please contact ReflowX at info@reflowx.com 

 

General Terms

  • ReflowX and the seller retain the right to evaluate and approve offers.
  • Buyers should verify quantities and conditions upon delivery.
  • After successful engagement, both buyer and seller manage communication for payment terms and delivery schedule.
  • All parties agree to adhere to ReflowX Terms and Conditions in transactions.
  • Buyers can request value-added services such as pre-purchase inspections, Expediting & Delivery Services through ReflowX. Contact us!
British Owned Company ISO
Reflowx

Transforming procurement for the Energy Sectors Contact us for Sustainable Solutions. Dubai Internet City- United Arab Emirates

Quick Links

Contact Us

Address UAE

Office 002,
Ground Floor,
Sheikh Mohammed,
Bin Zayed Rd,
Dubai Production City,
UAE

Address UK

Office 61,
Fordwell Road,
Fairfield,
Stockton-on-Tees,
UK

© ReflowX2024 - All Rights Reserved
ariba