MTU 16V4000L64F Gas Generator (2020)

General Information:

• Model: MTU 16V4000L64F
• Manufacturer: MTU Friedrichshafen (a part of Rolls-Royce Power Systems)
• Year of Manufacture: 2020
• Engine Type: 16-cylinder, V-type, four-stroke, spark-ignited gas engine
• Fuel Type: Natural gas, biogas, or other gaseous fuels
• Cooling System: Water-cooled system
• Application: Power generation for industrial, commercial, and backup applications
• Condition: Brand new, ready for operation

Engine Specifications:

• Number of Cylinders: 16 cylinders (V-configuration)
• Displacement: 64 liters
• Bore: 170 mm
• Stroke: 210 mm
• Compression Ratio: 11:1
• Rated Speed: 1,500 rpm (50 Hz) / 1,800 rpm (60 Hz)
• Rated Power Output:
  • Electrical Power: 1,250 kWe (nominal output)
  • Mechanical Power: ~1,400 kW (depending on application)
• Heat Rate: 8,750 kJ/kWh (at nominal power output)
• Fuel Consumption: Approximately 0.35 – 0.40 m³/kWh (natural gas at full load)
• Exhaust Temperature: 420°C (typical under full load)
• Ignition System: Spark ignition for high efficiency and clean combustion
• Turbocharger: Single-stage turbocharging system for improved performance

Performance and Operational Characteristics:

• Thermal Efficiency: Up to 43% electrical efficiency; high efficiency in Combined Heat and Power (CHP) applications
• Electrical Output: 1,250 kWe at 1,500 rpm (50 Hz), and 1,500 kWe at 1,800 rpm (60 Hz)
• Fuel Flexibility: Can operate on various gaseous fuels including natural gas, biogas, and other alternative fuels
• Operational Range: Capable of operating in a wide range of environmental conditions, from -5°C to +40°C ambient temperature
• Start-up Time: Typically 10-15 minutes for a cold start (depending on ambient conditions)
• Maintenance Intervals: Extended service intervals, minimizing downtime and reducing operational costs

Emissions and Environmental Performance:

• NOx Emissions: Low NOx emissions due to advanced combustion technology (typically < 500 mg/Nm³ at 5% O2)
• CO Emissions: Low CO emissions (typically < 100 mg/Nm³ at 5% O2)
• Particulate Matter: Low particulate emissions (typical under 5 mg/Nm³)
• Compliance: Meets or exceeds global emissions standards, including EU Stage V and U.S. EPA regulations, depending on configuration
• Noise Level: Low noise levels due to optimized engine design, suitable for urban and industrial environments

Control System and Integration:

• Control System: Digital control unit for efficient operation, remote monitoring, and diagnostics
• System Monitoring: Equipped with sensors for real-time performance monitoring, including temperature, pressure, fuel consumption, and operational status
• Grid Synchronization: Full capability for grid synchronization and load sharing in multi-unit setups
• Voltage Output: Compatible with synchronous generators (400V to 13.8 kV, depending on generator configuration)
• Power Factor: Typically 0.8 to 0.9, depending on load and generator setup

Applications:

• Power Generation: Ideal for industrial power generation, offering both base-load and peak-load power generation
• Cogeneration (CHP): Excellent for Combined Heat and Power (CHP) applications, providing both electrical and thermal energy
• Backup Power: Reliable backup power for critical facilities such as hospitals, data centers, and manufacturing plants
• Remote Power Generation: Suitable for off-grid locations where reliable, sustainable power generation is needed
• Industrial and Commercial Use: Flexible solution for a wide range of industries, including oil & gas, manufacturing, and large commercial applications

For further specifications or to inquire about this equipment and ReflowX's logistics services, Please contact ReflowX at info@reflowx.com