Mitsubishi FT8 Mobile PAC Gas Turbine (2025) Specifications | Efficient and Flexible Power Generation
product image
product image

MITSUBISHI FT8 MOBILE PAC Gas Turbine (2025)

ReflowX SKU: REF-6755

Product Details

  • Quantity
    4
  • Availability (Lead Time)
    N/A
  • Product Location
    India
  • Condition

    NEW SURPLUS

  • OEM
    ReflowX
  • Equipment code
    CFIHOS-30000534

Description

Mitsubishi FT8 Mobile PAC Gas Turbine (2025) Specifications:

General Specifications:

  • Model: Mitsubishi FT8 Mobile PAC Gas Turbine
  • Type: Industrial Gas Turbine, Mobile Power Generation Unit
  • Year: 2025 (Newer model)
  • Configuration: Single-shaft, Turbocharged, Intercooled
  • Fuel Type: Natural Gas, Diesel (Dual-Fuel capability)
  • Governor: Electronic, Digital control system
  • Cooling System: Air-cooled or optional water-cooled system for specific configurations
  • Start-up Time: Rapid start-up capabilities, typically within 10-15 minutes
  • Control: Advanced digital control and monitoring system with remote capabilities

Performance Data:

  • Power Output:
    • Nominal Power: 25 MW (megawatts) - base load power output
    • Maximum Power: Up to 30 MW (with specific configurations)
  • Speed:
    • Nominal Speed: 3,600 RPM (60 Hz)
    • 60 Hz and 50 Hz versions available (depending on geographic region)
  • Efficiency:
    • Electrical Efficiency: Approx. 35-40% at base load
    • Combined Heat and Power (CHP) Efficiency: Up to 85% in some configurations with heat recovery systems
  • Heat Rate: Approx. 10,500-11,500 Btu/kWh at full load (depends on operating conditions)
  • Exhaust Temperature: Approx. 460-500°C (860-932°F) at full load

Emissions and Environmental Compliance:

  • Emissions Standards:
    • Meets EPA Tier 4 Final and EU Stage V emissions standards
    • Low NOx emissions (<25 ppm at 15% O2) and CO emissions control
  • NOx Emissions: Typically <25 ppm (at 15% O2) depending on load and fuel type
  • CO Emissions: Typically <30 ppm (at 15% O2)
  • UHC (Unburned Hydrocarbons): Meets industry standards for reduced emissions

Alternator and Electrical System:

  • Alternator Type: Synchronous, brushless, self-excited
  • Voltage: 11 kV, 13.8 kV, or customer-specific voltage options
  • Frequency: 50 Hz or 60 Hz versions depending on region
  • Power Factor: Typically 0.8 lagging (standard for industrial use)
  • Voltage Regulation: ±1% of rated voltage under load
  • Protection: Comprehensive protections for overcurrent, overload, under-voltage, and short-circuit

Dimensions and Weight:

  • Length: Approx. 12,000 mm (472 inches)
  • Width: Approx. 2,800 mm (110 inches)
  • Height: Approx. 3,800 mm (150 inches)
  • Weight: Approx. 60,000–70,000 kg (132,000–154,000 lbs), depending on configuration and auxiliary components
  • Transportability: Mobile unit designed for easy transport and deployment

Fuel System:

  • Fuel Type: Natural Gas, with Diesel as a backup fuel option
  • Fuel Consumption: Approx. 0.36–0.38 kg/kWh (natural gas) at full load
  • Fuel Pressure: Approx. 0.5–1.0 bar (7.25–14.5 psi), depending on fuel quality
  • Fuel Flexibility: Dual-fuel operation for flexibility in fuel supply

Cooling and Exhaust:

  • Cooling: Air-cooled for most applications with optional water-cooling systems
  • Exhaust Temperature: Approx. 460–500°C (860–932°F) at full load
  • Exhaust Back Pressure: Low exhaust back pressure for optimal engine performance
  • Exhaust System: Includes muffler and optional exhaust after-treatment for further emissions reduction (SCR/ESP)

Control and Monitoring:

  • Control System: Advanced digital controls (Mitsubishi’s proprietary control system) for monitoring and diagnostics
  • Remote Monitoring: Available remote monitoring systems for real-time data collection, diagnostics, and performance tracking
  • Alarm System: Full suite of alarms including low oil pressure, high temperature, and overload protections
  • Startup/Shutdown: Fully automated with manual override capabilities

For further specifications or to inquire about this equipment and ReflowX's logistics services, Please contact ReflowX at info@reflowx.com 

 

General Terms

  • ReflowX and the seller retain the right to evaluate and approve offers.
  • Buyers should verify quantities and conditions upon delivery.
  • After successful engagement, both buyer and seller manage communication for payment terms and delivery schedule.
  • All parties agree to adhere to ReflowX Terms and Conditions in transactions.
  • Buyers can request value-added services such as pre-purchase inspections, Expediting & Delivery Services through ReflowX. Contact us!

What Our Customers Say

Reflowx icon

ReflowX - A Trusted Marketplace for Surplus Energy Sector Equipment

Shape a sustainable and circular future while reducing costs and carbon emissions with us.

  • ✅ Free Listings
  • ✅ Low-Cost Procurement
  • ✅ Cost Recovery Solutions
  • ✅ Tailored Sales Support
Mobile App

Tell Us Your Requirement Surplus Equipment | New Equipment | Sustainable Procurement

All Categories×
Pumps & Motors
Pumps & Motors
Heavy Equipment
Heavy Equipment
Heavy Equipment ×